Physics of the Future: How Science Will Shape Human Destiny and Our Daily Lives by the Year 2100 (35 page)

•
quantum dot computers:
Semiconductors used in chips can be etched into tiny dots so small they consist of a collection of perhaps 100 atoms. At that point, these atoms can begin to vibrate in unison. In 2009, the world’s smallest quantum dot was built out of a single electron. These quantum dots have already proven their worth with light-emitting diodes and computer displays. In the future, if these quantum dots are arranged properly, they might even create a quantum computer.

•
DNA computers:
In 1994, the first computer made of DNA molecules was created at the University of Southern California. Since a strand of DNA encodes information on amino acids represented by the letters A,T,C,G instead of 0s and 1s, DNA can be viewed as ordinary computer tape, except it can store more information. In the same way that a large digital number can be manipulated and rearranged by a computer, one can also perform analogous manipulations by mixing tubes of fluids containing DNA, which can be cut and spliced in various ways. Although the process is slow, there are so many trillions of DNA molecules acting simultaneously that a DNA computer can solve certain calculations more conveniently than a digital computer. Although a digital computer is quite convenient and can be placed inside your cell phone, DNA computers are more awkward, involving mixing tubes of liquid containing DNA.

In the movie
Terminator 2: Judgment Day,
Arnold Schwarzenegger is attacked by an advanced robot from the future, a T-1000, which is made of liquid metal. Resembling a quivering mass of mercury, it can change shape and slither its way through any obstacle. It can seep through the tiniest cracks and fashion deadly weapons by reshaping its hands and feet. And then it can suddenly re-form into its original shape to carry on its murderous rampage. The T-1000 appeared to be unstoppable, the perfect killing machine.

All this was science fiction, of course. The technology of today does not allow you to change a solid object at will. Yet by midcentury a form of this shape-shifting technology may become commonplace. In fact, one of the main companies driving this technology is Intel.

Ironically, by 2050, most of the fruits of nanotechnology will be everywhere, but hidden from view. Almost every product will be enhanced via molecular manufacturing techniques, so they will become superstrong, resistant, conductive, and flexible. Nanotechnology will also give us sensors that constantly protect and help us, distributed in the environment, hidden away, beneath the surface of our consciousness. We will walk down the street and everything will appear to be the same, so we will never know how nanotechnology has changed the world around us.

But there is one consequence of nanotechnology that will be obvious.

The
Terminator
T-1000 killer robot is perhaps the most dramatic example of an object from the field called programmable matter, which may allow us one day to change the shape, color, and physical form of an object with the push of a button. On a primitive level, even a neon sign is a form of programmable matter, since you can flick a light switch and send electricity through a tube of gas. The electricity excites the gas atoms, which then decay back to their normal state, releasing light in the process. A more sophisticated version of this is the LCD display found on computer screens everywhere. The LCD contains a liquid crystal that becomes opaque when a small electrical current is applied. Thus, by regulating the electrical current flowing inside a liquid crystal, one can create colors and shapes on a screen with the push of a button.

The scientists at Intel are much more ambitious. They visualize using programmable matter to actually change the shape of a solid object, just like in science fiction. The idea is simple: create a computer chip in the shape of a tiny grain of sand. These smart grains of sand allow you to change the static electric charge on the surface, so that these grains can attract and repel each other. With one set of charges, these grains can line up to form a certain array. But you can reprogram these grains so that their electrical charges change. Instantly, these grains rearrange themselves, forming an entirely different arrangement. These grains are called “catoms” (short for claytronic atoms) since they can form a wide range of objects by simply changing their charges, much like atoms. (Programmable matter has much in common with the modular robots we saw in
Chapter 2
. While the modular robots contain smart blocks, about 2 inches in size, that can rearrange themselves, programmable matter shrinks these building blocks to submillimeter size and beyond.)

One of the promoters of this technology is Jason Campbell, a senior researcher at Intel. He says, “Think of a mobile device. My cell phone is too big to fit comfortably in my pocket and too small for my fingers. It’s worse if I try to watch movies or do my e-mail. But if I had 200 to 300 milliliters of catoms, I could have it take on the shape of the device that I need at that moment.” So one moment, I have a cell phone in my hand. The next moment, it morphs into something else. This way, I don’t have to carry so many electronic gadgets.

In its laboratories, Intel has already created an array of catoms that are about an inch in size. The catom resembles a cube with scores of tiny electrodes spread evenly on its surfaces. What makes the catom unique is that you can change the charge on each of its electrodes, so that catoms bind to each other in different orientations. With one set of charges, these cubes might combine to create a large cube. Change the charges on each cube’s electrode, and then the catoms disassemble and quickly rearrange themselves into an entirely different shape, such as a boat.

The point is to shrink each catom to the size of a grain of sand, or even smaller. If one day silicon-etching techniques allow us to create catoms that are as small as a cell, then we might be able to realistically change one shape into another, simply by pushing a button. Justin Rattner, a senior fellow at Intel, says, “Sometime over the next forty years, this will become everyday technology.” One immediate application would be for automobile designers, airline engineers, artists, architects, and anyone who has to design three-dimensional models of their projects and then continually modify them. If one has a mold of a four-door sedan, for example, one can grab the mold, stretch it, and it suddenly morphs into a hatchback. Compress the mold a bit more and it turns into a sports car. This is far superior to molding clay, which has no memory or intelligence. Programmable matter has intelligence, can remember previous shapes, adapt to new ideas, and respond to the designers’ wishes. Once the mold is finalized, the design can simply be e-mailed to thousands of other designers, who can then create exact copies.

This could have a profound effect on consumer products. Toys, for example, can be programmed to change shape by inserting new software instructions. So for Christmas, one need only download the software for a new toy, reprogram the old toy, and an entirely new toy appears. Children might celebrate Christmas not by opening presents under the tree but by downloading software for their favorite toy that Santa has e-mailed them, and the catoms making up last year’s toy become the hottest thing on the market. This means that a wide array of consumer products may eventually be reduced to software programs sent over the Internet. Instead of hiring a truck to deliver your new furniture and appliances, you may simply download the software off the net and recycle your old products. Renovating homes and apartments won’t be such a chore with programmable matter. In your kitchen, replacing the tiles, tabletops, appliances, and cabinets might simply involve pushing a button.

In addition, this could cut down on waste disposal. You don’t have to throw out many of your unwanted things if you can simply reprogram them. If an appliance or piece of furniture breaks, you have only to reprogram it and it becomes new again.

Despite its enormous promise, there are also numerous problems facing the Intel team. One is how to orchestrate the movements of all these millions of catoms. There will be bandwidth problems when we try to upload all this information into the programmable matter. But there are also shortcuts one can take.

For example, in science fiction movies it is common to see “morphing,” that is, one person suddenly changing into a monster. This used to be a very complex, tedious process to create on film, but can now be done easily by computer. First, you identify certain vectors that mark different key points on the face, such as the nose and eyes, for both the human and the monster. Each time a vector is moved, the face changes gradually. Then computers are programmed to move these vectors, from one face to the next, thereby slowly changing one face into another. In the same way, it might be possible to use shortcuts when shape-shifting a 3-D object.

Another problem is that the static electrical forces between the catoms are weak when compared to the tough interatomic forces that hold most solids together. As we have seen, quantum forces can be quite powerful, responsible for the tough properties of metals and the elastic properties of plastic. Duplicating these quantum forces with static electrical forces to ensure that these products remain stable is going to be an issue in the future.

I had a chance to witness firsthand the remarkable, rapid advances in programmable matter when I took a Science Channel film crew to visit Seth Goldstein at Carnegie Mellon University. In his laboratory you could see large stacks of cubes scattered all over a table in various sizes, each with chips inside. I saw two of these cubes bound tightly together by electrical forces, and he asked me to try to rip them apart by hand. Surprisingly, I couldn’t. I found that the electrical forces binding these two cubes were quite powerful. Then he pointed out that these electrical forces would be correspondingly greater if you miniaturized the cubes. He took me to another lab, where he showed me just how small these catoms can become. By employing the same techniques used to carve out millions of transistors on silicon wafers, he could carve out microscopic catoms that were only millimeters across. In fact, they were so small that I had to look at them under a microscope to see them clearly. He hopes that eventually, by controlling their electrical forces, he can get them to arrange in any shape with a push of a button, almost like a sorcerer conjuring up anything he wants.

Then I asked him, How can you give detailed instructions to billions upon billions of catoms, so that a refrigerator, say, might suddenly transform into an oven? It seems like a programming nightmare, I said. But he replied that it wasn’t necessary to give detailed instructions to every single catom. Each catom has to know only which neighbors it must attach to. If each catom is instructed to bind with only a tiny set of neighboring catoms, then the catoms would magically rearrange themselves into complex structures (much like the neurons of a baby’s brain need to know only how to attach themselves to neighboring neurons as the brain develops).

Assuming that the problem of programming and stability can be solved, then by late century there is the possibility that entire buildings or even cities may rise at the push of a button. One need only lay out the location of the buildings, dig their foundations, and allow trillions of catoms to create entire cities rising from the desert or forest.

However, these Intel engineers envision the day when the catoms may even take human form. “Why not? It’s an interesting thing to speculate on,” says Rattner. (Then perhaps the T-1000 robot may become a reality.)

HOLY GRAIL: THE REPLICATOR

By 2100, advocates of nanotechnology envision an even more powerful machine: a molecular assembler, or “replicator,” capable of creating anything. It would consist of a machine perhaps the size of a washing machine. You would put the basic raw materials into the machine and then push a button. Trillions upon trillions of nanobots would then converge on the raw materials, each one programmed to take them apart molecule by molecule and then reassemble them into an entirely new product. This machine would be able to manufacture anything. The replicator would be the crowning achievement of engineering and science, the ultimate culmination of our struggles ever since we picked up the first tool back in prehistory.