Microbrewed Adventures (34 page)

Mash/Extract Recipe
for 5 gallons (19 l)

Spread 6 oz. of whole pale malt on a cookie sheet and toast in a moderate oven until you hear popping noises and smell the aroma of toasted malt. Do not toast to a dark brown. Cool this malt before crushing.

Heat 1 gallon (3.8 l) water to 172 degrees F (77.5 C) and then add crushed grains to the water. Stir well to distribute heat. Temperature should stabilize at about 155 degrees F (68 C). Wrap a towel around the pot and set aside for about 45 minutes. Have a homebrew.

After 30 minutes, add heat to the mini-mash and raise the temperature to 167 degrees F (75 C). Then pass the liquid and grains into a strainer and rinse with 170-degree F (77 C) water. Discard the grains.

Add more water to the sweet extract you have just produced, bringing the volume up to about 2.5 gallons (9.5 l). Add malt extract and 60-minute hops and bring to a boil.

The total boil time will be 60 minutes. When 20 minutes remain, add the 20-minute hops. When 10 minutes remain, add the Irish moss. When 2 minutes remain, add the 2-minute hops. After a total wort boil of 60 minutes, turn off the heat and place the pot (with cover on) in a running cold-water bath for 30 minutes. Continue to chill in the immersion or use other methods to chill your wort. Then strain and sparge the wort into a sanitized fermenter.
Bring the total volume to 5 gallons (19 l) with additional cold water if necessary. Aerate the wort very well.

Pitch the yeast when temperature of wort is about 70 degrees F (21 C). Once visible signs of fermentation are evident, ferment at about 55 degrees F (12.5 C) for about 1 week, or until fermentation shows signs of calm and stopping. Rack from your primary to a secondary fermenter and if you have the capability, “lager” the beer at temperatures between 35 and 45 degrees F (1.5–7 C) for 3 to 6 weeks.

Prime with sugar and bottle or keg when complete.

MASTERBREWERS CELEBRATION LIGHT LAGER

• TARGET ORIGINAL GRAVITY: 1.046 (11.5 B)
  
• APPROXIMATE FINAL GRAVITY: 1.008 (2 B)
  
• IBU: ABOUT
  27
  
• APPROXIMATE COLOR: 7 SRM (14 EBC)
  
• ALCOHOL: 5% BY VOLUME
  

Mash/Extract Recipe
for 5 gallons (19 l)

Spread 8 oz. of whole pale malt on a cookie sheet and toast in a moderate oven until you hear popping noises and smell the aroma of toasted malt. Do not toast to a dark brown. Cool this malt before crushing.

Heat 3 quarts (3 l) water to 172 degrees F (77.5 C) and then add crushed grains to the water. Stir well to distribute heat. Temperature should stabilize at about 155 degrees F (68 C). Wrap a towel around the pot and set aside for about 45 minutes. Have a homebrew.

After 30 minutes, add heat to the mini-mash and raise the temperature to 167 degrees F (75 C). Then pass the liquid and grains into a strainer and rinse with 170-degree F (77 C) water. Discard the grains.

To the sweet extract you have just produced, add more water, bringing the volume up to about 2.5 gallons (9.5 l). Add malt extract and 60-minute hops and bring to a boil.

The total boil time will be 60 minutes. When 10 minutes remain, add the Irish moss. When 5 minutes remain, add the 5-minute hops. After a total wort boil of 60 minutes, turn off the heat and place the pot (with cover on) in a running cold-water bath for 30 minutes. Continue to chill in the immersion or use other methods to chill your wort. Then strain and sparge the wort into a sanitized fermenter. Bring the total volume to 5 gallons (19 l) with additional cold water if necessary. Aerate the wort very well.

Pitch the yeast when temperature of wort is about 70 degrees F (21 C). Once visible signs of fermentation are evident, ferment at about 55 degrees F (12.5 C) for about 1 week, or until fermentation shows signs of calm and stopping. Rack from your primary to a secondary fermenter and if you have the capability, “lager” the beer at temperatures between 35 and 45 degrees F (1.5–7 C) for 3 to 6 weeks.

Prime with sugar and bottle or keg when complete.

KLIBBETY JIBBIT

• TARGET ORIGINAL GRAVITY: 1.046 (11.5 B)
  
• APPROXIMATE FINAL GRAVITY: 1.010 (2.5 B)
  
• IBU: ABOUT
  29
  
• APPROXIMATE COLOR: 4 SRM (8 EBC)
  
• ALCOHOL: 4.8% BY VOLUME
  

A step infusion mash is employed to mash the grains. Add 7.5 quarts (7.1 l) of 140-degree F (60 C) water to the crushed grain, stir, stabilize and hold the temperature at 132 degrees F (53 C) for 30 minutes. Add 3.75 quarts (3.6 l) of boiling water, add heat to bring temperature up to 155 degrees F (68 C) and hold for about 30 minutes. Then raise temperature to 167 degrees F (75C), lauter and sparge with 3.5 gallons (13.5 l) of 170-degree F (77 C) water. Collect about 5.5 gallons (21 l) of runoff. Add 60-minute hops and bring to a full and vigorous boil.

The total boil time will be 60 minutes. When 20 minutes remain, add the 20-minute hops. When 10 minutes remain, add the Irish moss. When 2 minutes remain, add the 2-minute hops. After a total wort boil of 60 minutes, turn off the heat and place the pot (with cover on) in a running cold-water bath for 30 minutes. Continue to chill in the immersion or use other methods to chill your wort. Then strain and sparge the wort into a sanitized fermenter. Bring the total volume to 5 gallons (19 l) with additional cold water if necessary. Aerate the wort very well.

Pitch the yeast when temperature of wort is about 70 degrees F (21 C). Once visible signs of fermentation are evident, ferment at about 55 degrees F (12.5 C) for about 1 week, or until fermentation shows signs of calm and stopping. Rack from your primary to a secondary fermenter and add the hop pellets for dry hopping. If you have the capability, “lager” the beer at temperatures between 35 and 45 degrees F (1.5–7 C) for 4 to 8 weeks.

Prime with sugar and bottle or keg when complete.

Mash/Extract Recipe
for 5 gallons (19 l)

Heat 1.5 gallons (5.7 l) water to 172 degrees F (77.5 C) and then add crushed grains to the water. Stir well to distribute heat. Temperature should stabilize at about 155 degrees F (68 C). Wrap a towel around the pot and set aside for about 45 minutes. Have a homebrew.

After 45 minutes, add heat to the mini-mash and raise the temperature to 167 degrees F (75 C). Then pass the liquid and grains into a strainer and rinse with 170-degree F (77 C) water. Discard the grains.

To the sweet extract you have just produced, add more water, bringing the volume up to about 2.5 gallons (9.5 l). Add malt extract and 60-minute hops and bring to a boil.

The total boil time will be 60 minutes. When 20 minutes remain, add the 20-minute hops. When 10 minutes remain, add the Irish moss. When 2 minutes remain, add the 2-minute hops. After a total wort boil of 60 minutes, turn off the heat.

Immerse the covered pot of wort in a cold-water bath and let sit for 30 minutes, or the time it takes to have a couple of homebrews.

Then strain out and sparge hops and direct the hot wort into a sanitized fermenter to which 2.5 gallons (9.5 l) of cold water has been added. Bring the total volume to 5 gallons (19 l) with additional cold water if necessary. Aerate the wort very well.

Pitch the yeast when temperature of wort is about 70 degrees F (21 C).
Once visible signs of fermentation are evident, ferment at about 55 degrees F (12.5 C) for about 1 week, or until fermentation shows signs of calm and stopping. Rack from your primary to a secondary fermenter and add the hop pellets for dry hopping. If you have the capability, “lager” the beer at temperatures between 35 and 45 degrees F (1.5–7 C) for 4 to 8 weeks.

Prime with sugar and bottle or keg when complete.

MILE-HIGH GREEN CHILE ALE

• TARGET ORIGINAL GRAVITY: 1.051 (12.6 B)
  
• APPROXIMATE FINAL GRAVITY: 1.012 (3 B)
  
• IBU: ABOUT
  35
  
• APPROXIMATE COLOR: 9 SRM (18 EBC)
  
• ALCOHOL: 5.1% BY VOLUME
  

All-Grain Recipe
for 5 gallons (19 l)

A step infusion mash is employed to mash the grains. Add 8.5 quarts (8.1 l) of 140-degree F (60 C) water to the crushed grain, stir, stabilize and hold the tem
perature at 132 degrees F (53 C) for 30 minutes. Add 4 quarts (3.8 l) of boiling water, add heat to bring temperature up to 155 degrees F (68 C) and hold for about 30 minutes. Then raise temperature to 167 degrees F (75 C), lauter and sparge with 3.5 gallons (13.5 l) of 170-degree F (77 C) water. Collect about 5.5 gallons (21 l) of runoff. Add 60-minute hops and bring to a full and vigorous boil.

The total boil time will be 60 minutes. When 20 minutes remain, add the 20-minute hops. When 10 minutes remain, add the Irish moss. After a total wort boil of 60 minutes, turn off the heat and place the pot (with cover on) in a running cold-water bath for 30 minutes. Continue to chill in the immersion or use other methods to chill your wort. Then strain and sparge the wort into a sanitized fermenter. Bring the total volume to 5 gallons (19 l) with additional cold water if necessary. Aerate the wort very well.

Pitch the yeast when temperature of wort is about 70 degrees F (21 C). Ferment at about 70 degrees F (21 C) for about 1 week, or until fermentation shows signs of calm and stopping. Rack from your primary to a secondary fermenter and add chopped roasted chilies. If you have the capability, “cellar” the beer at about 55 degrees F (12.5 C) for about 1 week.

Prime with sugar and bottle or keg when complete.

Malt Extract Recipe
for 5 gallons (19 l)

Place crushed grains in 2 gallons (7.6 l) of 150-degree F (68 C) water and let steep for 30 minutes. Then strain out (and rinse with 3 quarts [3 l] hot water) and discard the crushed grains, reserving the approximately 2.5 gallons (9.5 l) of liquid to which you will now add malt extract and 60-minute hops. Bring to a boil.

The total boil time will be 60 minutes. When 20 minutes remain, add the 20-minute hops. When 10 minutes remain, add the Irish moss. After a total wort boil of 60 minutes, turn off the heat.